Products
For DL series
Sturdy, self-lubricating plastic rack
Integrated mounting brackets
Stainless steel or galvanized steel pinion
To facilitate the integration of our DL motors into a mobile pool deck, UNICUM can supply the additional components needed for a successful installation: pinion and rack.
The rack is supplied in unit modules of around one meter in length, and is already equipped with the brackets and holes required for fixing to the mobile terrace.
This is a self-lubricating, reinforced polyamide rack with a steel core that enables it to accept a linear thrust of up to 200 kg.
The associated pinion can be supplied in stainless steel or galvanized steel, allowing to achieve a linear speed of between 2 and 3 m/min, depending on the motorization chosen and the weight of the terrace.
The choice of materials makes it possible to completely eliminate the problem of lubrication; this advantage is particularly important in the pool environment, where grease and oil could compromise the cleanliness of the water and the finishing materials around the pool.
The rack supports a linear thrust of up to 200Kg
Lubrication between plastic rack and pinion not required
The rack is supplied complete with installation and adjustment holes.
Unicum is the « one stop shop » supplying all needed components for a deck drive
Rack | Pinion | |
Materials | 30% glass-filled polyamide; Steel core | Stainless steel or galvanized steel |
Module | M4 | M4 |
Toothing | Straight | Straight |
Max. linear thrust | 200 kg | / |
Length | 1m | / |
Mounting brackets | 6 per module | / |
Number of teeth | / | 20 |
These products may also be of interest to you